Blog

All the news from the TMC world

Reducing CO2 emissions is a mission for all of us, both in private life and in industrial applications.

Different key solutions exist for reaching this ambitious target in terms of power generation.

All current renewable solutions are based on water, solar, and wind.

Renewable applications and installations require extreme flexibility and high-performance products to achieve the ambitious targets of reliability and real benefits, in terms of both ecological impact (important reduction of losses) and plant efficiency.

, later the official EN50588-1, fixed the basic milestones driving the performance of distribution transformers in 

. Due to this, the responsibility shifted to manufacturers to develop technology with the best performance to meet both ECODESIGN regulation standards and the expected payback in terms of cost of ownership.

Total savings is, in fact, the real commitment of TMC Transformers, which engineers and designs all transformers by applying every possible 

Our dedicated R&D department simulates each application using 

. This structured approach allows TMC Transformers to find the best and most reliable 

, from common distribution units up to the most challenging applications, also achieving excellence in the installations in nuclear power plants.

The risk of nuclear struggle is more than topical. It is easy to imagine, even in normal situations, how critical the perfect production of feeder units to for nuclear reactors is.

Strong, high-performance units are required and must be able to operate under 

 while reliably operating with extreme, sudden overload cycles to prevent dramatic failure. TMC Transformers has broad experience in these applications, expanded upon through repeated supplies for nuclear power plants.

Electrical and mechanical stresses are withstood perfectly through the application of innovative concepts and the use of high quality standards, materials, and processes.

The latest step in this direction is the 

applied by TMC Transformers. In particular, this technology allows transformers to excel where other products would fail or not perform as required and needed. Such insulation technology allows TMC Transformers units to be a real solution for the best performance in any application, giving every customer total peace of mind.

Renewable and nuclear energy: the frontiers of co2 emission reductions

Today, in the transformers market and especially in the marine & offshore applications, a 

 is gradually solidifying: the use of green technology with fully environmentally compliant transformers that are recyclable and non-polluting, which can be used in outdoor applications for which companies typically use oil-based solutions.

A very clear tendency in this context is the use of 

. These ferries typically carry batteries that must be charged quickly in port and withstand the entire journey to the port of arrival.

transformers required transformers are very special

, and typically have several secondaries with particular impedances and a need to withstand large loads for short periods of time.

has participatinged in designing and manufacturing transformers in several such projects during the last two years in combination with 

. All this is complemented by a dedicated and expert service department. Repair operations on board are sometimes complex and often urgent, so the personnel dedicated to this task need to be top-notch. 

Moreover, the marine sector is very demanding, not only technically, but also in terms of project management. Professionals are required to have extensive experience in this highly specialized area.

Technically, this market is heavily regulated by 

 that managers must understand perfectly. In addition to the design itself, structural analysis using a finite element approach helps to verify the feasibility of the proposed solutions.

One feature differentiating marine transformers is the 

. This influences not only the size and weight of the final solution, but also its 

 and resistance to failure. The most common types of cooling are 

 (AN), in which the transformer does not require external cooling, and 

 (AFWF), where the transformer requires a highly specialized air-water heat exchanger integrated in its enclosure, where water is used to cool the air inside and therefore also the transformer coils.

Another common characteristic is the use of integrated 

 to help with inrush currents that can damage the main transformer.

Lastly, given the environment where these transformers must operate, proper corrosion protection (metal treatments and painting) is necessary.

Marine & Offshore sector: a complex and sustainable world of transformers

as the world's primary fuel sources. The processes and systems involved in producing and distributing oil and gas are highly complex, capital-intensive and require cutting edge technology.

The industry is often divided into three segments:

, the business of oil and gas exploration and production.

The upstream segment of the oil and gas industry contains 

, which include creating geological surveys, obtaining land rights and production activities, consisting of onshore and offshore drilling.

Oil and gas exploration encompasses the processes and methods involved in locating potential sites for oil and gas drilling and extraction. 

 are conducted using various means from testing subsoil for onshore exploration to using seismic imaging for offshore exploration. Energy companies compete for access to mineral rights granted by governments, by either entering a 

, meaning any discovered oil and gas are exclusive property of the producers, or a 

, where the government retains ownership and participation rights. Exploration is highly risky and expensive, involving primarily corporate funds. However, when an exploration site is successful and oil and gas extraction is productive, exploration costs are recovered and are significantly less impactful with respect to other production costs.

Oil and gas production is one of the most capital-intensive industries and it requires expensive equipment and highly skilled labour. Once a company identifies where oil or gas is located, plants begin by drilling. Many oil and gas companies contract with specialized drilling firms, paying for the labor crew and rig day rates. While every drilling rig has the same essential components, the drilling methods vary depending on the type of oil or gas and the geology of the location.

 facilities, the wells are grouped together in a field. The group of wells are connected by 

 that send the oil and gas to a production and processing facility, where the raw materials are treated through a chemical and heating process. Onshore production companies can turn on and off rigs more easily than offshore rigs to respond to market conditions.

that is either fixed (bottom supported) or mobile (floating secured with anchors). Offshore drilling is more expensive than onshore drilling, as are fixed rigs with respect to mobile ones. Most production facilities are located on coastal shores near offshore rigs.

, is a technique that uses a high-pressure liquid to 

. The use of fracking has led to a greater ability of recovering gas, followed by oil, from previously inaccessible parts of drilled wells in addition to extractions from coalbed wells, tight sand formations and shale formations.

 of crude oil, natural gas and refined products. In its unrefined state, crude oil is transported by two primary modes: 

, travelling interregional water routes, and 

, where most of the oil moves through for at least part of the route. Once the oil has been extracted and separated from natural gas, pipelines transport the products to another carrier or directly to a refinery. Petroleum products then travel from the refinery to market by tanker, truck, railroad car, or more pipelines.

Crude oil moves from wellhead to refinery using tankers, pipelines, trucks, and railroads. Natural gas is transported by pipelines and liquefied natural gas (LNG) tankers.

 (designed to carry oil or solid cargoes in bulk). Tank vessels are classified according to the different types and the three most common categories are crude oil carriers, product carriers (which can carry clean e.g., gasoline and dirty e.g. black oils) and parcel carriers (chemicals). Crude carriers are classed as either 

 (Ultra Large Crude Carriers) and are designed to transport vast quantities of crude oil over many, long and heavily traveled sea routes. In addition, "lightering," offloading or transferring oil from large tankers to smaller ones is used, so that the vessels can enter smaller ports.

: pipelines can refer to gathering systems (wellhead to processing facilities), transmission lines (supply areas to markets) or distribution pipelines (most commonly to transport natural gas to medium or small consumer units). 

Pipelines play a very critical role in the transportation process

 because most of the oil moves through them for at least part of the route. After the crude oil is separated from natural gas, pipelines transport it to another carrier or directly to a refinery. Petroleum products then travel from the refinery to market by tanker, truck, railroad tank car, or pipeline. 

involves determining the shortest and most economical routes where pipelines are built, the number of pumping stations and natural gas compression stations along the line, and terminal storage facilities so that oil from almost any field can be shipped to any refinery on demand. Offshore pipelines carry more risk for leaks and environmental impact than onshore pipelines, but technological advancements in pipeline material and monitoring systems have improved their safety and efficiency.

: high pressures and explosions make it difficult to transport compressed natural gas on tankers. Due to scientific advancements, natural gas can be turned to liquid at extremely low temperatures and transported as liquefied natural gas (

). LNG tankers are specially designed with double hulls, to allow extra ballast water because LNG is lighter than gasoline and has additional safety benefits.

were the primary means of petroleum transportation. Today, railroads compete with pipelines: despite being usually a more expensive solution, the already existing railroad infrastructure creates an alternative, more flexible route when pipelines are at capacity. Many petroleum products travel from refineries to markets by tank truck or railroad tank car. Tank trucks deliver gasoline to service stations and heating oil to houses.

of oil and natural gas helps smooth out supply and demand discrepancies. Companies store more when the prices are lower than they would like and withdraw when prices are high. The cheapest storage method is 

, such as depleted reservoirs. This method is primarily used for natural gas; finished oil products cannot be stored in underground natural spaces as per regulations. Above ground tanks are used for crude and refined oil, finished oil products, and natural gas. At retail locations, like gas stations, tanks are stored underground for safety reasons. Tanker ships are used for temporary storage when land storage is at capacity, making it the most expensive option.

. While refining is a complex process, the goal is straightforward: 

 which is virtually unusable in its natural state, and

 products used for a variety of purposes such as heating homes, fueling vehicles and making petrochemical plastics. Refineries are usually located near population centers to facilitate marketing and distribution of final products. Marketing is the wholesale and retail 

 products to business, industry, government, and public consumers.

Generally, crude oil and petroleum products flow to the markets that provide the 

 to the supplier, which usually means the nearest market first because of lower transportation cost and higher net revenue for the supplier. In practice, however, the trade flow may not follow this pattern due to other factors, such as refining configurations, product demand mix, and product quality specifications.

TMC DRY-TYPE TRANSFORMERS FOR OIL & GAS INDUSTRY

manufacturing company with relationships and presences to support a 

. Thanks to the acquired experiences in different market sectors, TMC can offer a suitable solution of dry-type transformers for many 

. According to the short description of the oil and gas industry, it is easy to understand that there are many applications for dry-type transformers but there are also specific and very tough requirements. In the offshore area, the demands for 

are particularly stringent. Whether it is for energy supply to the crew quarters, for the power supply to the drilling module or for the production compressors, the toughest of standards are demanded. Installations can be on drilling platforms, production rigs or on any Floating Production Storage Offloading (

In no other field, the expectations for the material used are as high as in the offshore area installations which can be on drilling platforms, production rigs or on any Floating Production Storage Offloading (FPSO) unit. 

TMC dry-type transformers are exceptionally safe and reliable

. Both the electrical and the mechanical properties of this technology ensure a maximum of reliability and enable it to be used in virtually every environment. As almost no flammable materials are used during manufacturing process, the dry-type technology is highly recommended when you have a fire load and explosion hazard. In onshore plants, equipment is exposed to very different conditions. As the production plants can be located both at 

, mechanical stability and protection against environmental influences are of particular importance.

classes of TMC dry-type transformer is the right solution for these heavy environmental conditions.

Due to the typical location in coastal, oil & gas terminals sites entail special demands in terms of 

. The TMC dry-type transformers already have many references in these working conditions for solution with enclosure up to IP56 and for outdoor installation.

variety of different applications for transformers

, where the customer asks for very disparate requirements. On the one hand, standard 

 are required for general energy supply, and on the other hand different 

 for the drive systems of the pumps and compressors which can be installed in a wide variety of environmental conditions.

In this case TMC dry-type transformers offer the required flexibility and decades of experiences. As TMC Transformers SpA manufactures both standard and special transformers, we can offer a suitable solution for every requirement and a certified solution for hazardous area Zone 1 & Zone 2 compliant with 

Whether with ships or with onshore and offshore pipelines, availability is of particular importance in the transportation of oil and gas. Considering that dry-type transformers are virtually maintenance-free products, TMC Transformers can assure a higher availability of the transformer.

TMC dry-type transformers for Oil & Gas industry

and execution, it is quite often under discussion which one can be the 

to have the best result in terms of performances.

The analysis must be carried on considering different topics

Aluminium transformers VS copper transformers

TMC Transformers products are realized for distribution and special applications

: two very different souls combined together under a single roof, to offer to our customers the most suitable technology and service. The company is mainly working on 

dry type transformers and reactors for all the applications worldwide.

 We are talking about industry, simple distribution for building and infrastructures, traction substations, marine and offshore, oil and gas, renewable energy, battery storage, mining, data center, power plants, e-mobility.

The most innovative development concerns outdoor transformers where we introduced new ways to protect the transformers and innovative solution to cool it down. We can now deliver a proper solution for any specific ambient challenging the most polluted, humid or aggressive environment. 

As an example of this new innovation, we have recently done, on one side, an installation in a mine in the middle of the desert ,and on the other side, one in very snowy and cold area, close to the Arctic Circle.

The future of transformers' world

Send your application

The page you are looking for does not exist

Go to the correct site based on your language.

Are you visiting us from 

Are you surfing form the 

We have received you message. We will reach you out as soon as possible.

The Ticket code to participate in the raffle has been sent to your email!

Don’t forget to take part in the drawing on 1th november at 7pm at our stand 39 @Electricity&Energy in Eilat.